Canon Reset Tool

Canon

Canon Reset Tool G3010

Open the Service Tool. The two sheets of paper to print out when the nuke. The latter part of the Clear Ink Counter Reset Absorber MainBlack select and click Set. A fucntion was finished and will respond OK. At the rear of the Ink Absorber Counter Reset Absorber MainColor select and click Set. A fucntion was finished, and it is to respond OK. Canon G1000 G2000 G3000 Printer Reset without using Service ToolWebsite: All-in-One Ink Tank Colour Printeramazon: https. Download Canon Service Tool V3400 for Free. Service Tool V3400 free download and google drive download. This software application is can in multiuse. The software program could be utilized to reset some models/series printer output of the supplier of the Canon. The name of his Software is a solution device V3400.

Occasionally, some users will experience the error on their printer where it stops printing and all the lights start flashing. Different printer models may have different descriptions of this error, but it seems to be generally described as a ‘Unknown Printer Error’. In fact, numerous users in the internet community believe that this error is most often experienced when the printer has reached a condition where it thinks the ink waste pads inside the printer are full. That’s right - all that ink you lose in cleaning cycles and priming new cartridges has to go somewhere, and your Epson printer keeps track of roughly how much ink it has dumped into some large absorbent pads in the base of the printer!

Canon

Technically, this condition requires an Canon service engineer to resolve. It is however, possible that you could fix it yourself by resetting the printer and clearing the counter of how much ink has gone to those pads. You can do this as follows: (this seems to work on numerous Epson desktop printers, but we make no claims about it’s reliability on your printer. Use at own risk etc!) However, we now have three separate procedures supplied by various users; it seems that there are either different reset procedures depending upon printer model, or something else is going on that we do no understand!

Some Canon user found some problem on Canon Pixma MP198, the Problem is How To Reset Canon Pix MP198 or They try to find some Resetter.

Reset Waste Ink:

Canon reset tool error 005
  1. Enter SERVICE MODE. By pressing Menu Copy Scan Copy Copy
  2. Select TEST MODE.
  3. Select [8] PRINTER TEST in TEST MODE.
  4. Select 3. [EEPROM CLEAR].
  5. Select 0. [INK COUNT].
  6. Press the [Set] key.
  7. Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
Hope that tip is useful!

Here the reset procedure to reset waste ink counter on Canon Pixma MP145 and MP160 :

Canon Reset Tool Download

Canon reset tool free download
  1. With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
  2. When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
  3. When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection).
  4. When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately inorange and green, starting with orange.)note: press 4 times for waste ink counter reset.
  5. Unplug cable power from a power source.
Canon printer service tool

Reset Waste INk Canon iX4000, iX5000

  1. Connect the Canon PIXMA iX5000 or iX4000 printer to the power cord. ( note : If the automatic power-on function is enabled in the printer, the printer enters the service mode for the first time, but it will never enter the service mode if the printer is turned off by the Power button. This is because the printer remains to be turned on internally if the power is turned off by the Power button. To prevent this, disconnection of the power cord is required before starting the printer in the service mode ).
  2. With the Canon PIXMA iX5000 or iX4000 printer powered off, while pressing the Resume/Cancel button, press and hold the Power button. (note : Don’t release the buttons. The Power LED lights in green to indicate that a function is selectable.)
  3. While holding the Power button, release Resume/Cancel button. (Don’t release the Power button.)
  4. While holding the Power button, press Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons.
  5. When the Power LED lights in green, press the Resume/Cancel button 4 times to reset waste ink counter in the Canon Pixma iX5000 / iX4000. (note : If the Power LED does not light in green the printer does not enter the service mode, disconnect the power cord and plug it again. Then start from step 1 to start the printer in the service mode again).
  6. At the end of the service mode, press the Power button. The paper lifting plate of the sheet feed unit will be raised.